Digitus DN-13006-1 User Manual

54
SMB Setup
The print server supports the SMB (Server Message Block) protocol, user can send the print
jobs through Network Neighborhood without installing print server’s driver. The print server
also support the SMB printing on Microsoft Windows Vista/7/8/10.
1. Click Setup, it appears the sub-menu.
2. Click SMB, it as shown in the following picture.
Workgroup Name: This option allows you to assign a workgroup name to print server on the
Network Neighborhood. Windows uses it to identify the print server on
the Network.
Shared Name: This option allows you to assign a name to print server’s port.

Digitus DN-13006-1 Specifications

General

Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Network connection type	Ethernet LAN
Web-based management	Yes
Supported network protocols	TCP/IP
USB connector type	USB Type-A
Serial ports quantity	0
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Internal	No
Product color	White
Country of origin	Taiwan
AC input voltage	230 V
AC input frequency	50 Hz
Package type	Box