8
3.4.2 Playback
To play a recording, click “ ” or “ ”, and select the “Record” tab. A list of all the recordings will be shown
by defaults, and you can also sort out the logs you want to speed up the search time.
3.4.3 Firmware upgrade
This function is used when users need to upgrade the device for function scalability.
Note: Before using this function, make sure you have the correct upgrade files provided by your
installer or distributor.
Step1: Click “ ”, and select the IP address of your device in the address book.
Step2: Click “
” to show the upgrade page, “Update Server”.
To Next Page
Loading...
Need help?
General
