20
4.6.8 Filter
Choose to permit or block the IP address(es) which can access this camera, and click
“Save” to confirm.
Function Description
Filter Configuration
Error Count Set the maximum count for login failure. When the maximum count is
reached, the IP address trying to access the device will be locked.
Error Lock Time Set the lock time in minutes when the maximum count of error login
for an IP address is reached.
Echo Request Select “Non-Block” to allow other users to use the ping command to
detect the IP address of your device, or “Block” to deny the ping
command request.
IP/MAC Filter Configuration
IP/MAC Filter Choose to enable or disable the filter function.
IP/MAC Filter
Policy
If “Enable” is selected, choose whether you want to permit (Allow) or
block (Deny) the IP address list below.
IP/MAC Filter Rules
Rule
‧ To add an item to the IP address list, key in the IP address in
“Rule”, and click “Add”.
‧ To remove an existing item in the IP address list, click the item
you want to remove, and click “Delete”.
To Next Page
Loading...
Need help?
General
