2
2. BEFORE USING YOUR DEVICE
This device can be accessed via our supplied CMS software “Video Viewer”, the web
browser (such as “Microsoft Internet Explorer” or “Mozilla Firefox”), and smart phones with
our self-developed program “EagleEyes” installed depending on different using situations.
Note: For details about accessing devices via smart phones, please refer to
http://www.eagleeyescctv.com.
Before using the device, make sure:
1) You have installed the supplied CMS software, “Video Viewer”, or a web browser.
2) You have configured the network settings, and the network connection is fine.
For Video Viewer installation, please refer to “3.1 Installing Video Viewer” at page 3.
For network configurations, please refer to your installation guide.
To check or configure up to 16 surveillance devices simultaneously with the record
function, please use “Video Viewer”.
For details about using Video Viewer, please refer to “3. ACCESSING THE CAMERA
VIA VIDEO VIEWER” at page 3, and “4. CONFIGURATION” at page 14.
To check or configure this device only, it’s recommended to use the web browser “Microsoft
Internet Explorer” or “Mozilla Firefox”.
For details about using the web browser, please refer to “4. CONFIGURATION” at page 14.
To Next Page
Loading...
