28
Step3: Copy the generated API key, and click “Update Google Maps Key” on the web
browser to paste it.
4.8.8 Upgrade
This function is used when users need to upgrade the device for function scalability.
Note: Before using this function, make sure you have the correct upgrade files
provided by your installer or distributor.
Step1: Click “ ” to browse to where you save the upgrade files, and select them one by
one until all files are selected (up to four files).
Step2: To make a system backup for restore all camera configurations later, click
“Backup”.
Step3: Click “Upgrade” to start system upgrading.
Note: It takes a few minutes to finish the upgrade process. Do not disconnect the
power during firmware upgrade, or the upgrade may be failed. The camera
will reboot after the upgrade.
To Next Page
Loading...
Need help?
General
