19
4.6.7 SMS
Note: Before using this function, you need to apply an API ID from the mobile
messaging company, Clickatell, and you will be charged starting from the 11
th
message. For details, please refer to “APPENDIX 2 API ID APPLICATION FOR
SMS MESSAGING’ at page 30.
Enter the detailed information needed for text messaging, and click “Save” to confirm. The
information you set here will be applied when “SMS” is selected in “General” → "Trigger".
Function Description
System The text messaging service provider is Clickatell.
User name /
Password
Enter the account user name and password you created in
Clickatell.
API ID Enter the API ID you applied from Clickatell.
Recipient Click “Add” to enter the phone number, including the country
code, to receive the text message. Five sets of phone numbers
are allowed.
Transfer Interval Set the interval time in minutes between two-message sending.
The options are 0, 15, 30 & 60.
Reset Counter Click to restart the text messaging, and the SMS will be sent after
the specified time interval since you click this button.
Message Enter the text content (up to 70 characters) you want to send with
the text message.
Test SMS To know whether your SMS setting is correct, click this button to
immediately send a SMS to your phone.
Note: This testing is not free and you will be charged for SMS
sending base on your local rate.
To Next Page
Loading...
Need help?
General
