14
OSD ACTIVATING HOTKEY: Select OSD activating hotkey
• [Ctrl] [Ctrl] Set hotkey as [Ctrl] [Ctrl]
• [Scroll] [Scroll] Set hotkey as [Scroll] [Scroll]
• [Shift] [Shift] Set hotkey as [Shift] [Shift]
• [Alt] [Alt] Set hotkey as [Alt] [Alt]
Move the highlight bar to an option and press [Enter] to select it.
SET PASSWORD: Set new password.
First enter old password, then enter new password and confirm it. The new
password is set. If error occurs, the screen will remind users.
CLEAR THE NAME LIST:
Clear the names of port list. You need to enter password to clear the names of
port list.
RESTORE DEFAULT VALUE:
Restore settings to default value.
You need to enter password to restore settings to default value.
Note: The user password will also be cleared, and the factory password will not.
LOCK CONSOLE:
Lock the console. You cannot switch or scan after you lock the console (including
switch by push button on the panel or OSD). You need to enter password to set.
Note: After locking the console, you can also unlock the console by this option.
It also needs password verification.
10. Troubleshooting
Symptom Possible Cause Action
Keyboard and/or
mouse not
responding.
No connection to the
computer.
Check the cable from the switch
to the computer to make sure it
KVM switch needs to
be reset.
Press reset button on the rear
panel.
Plug power adapter to supply
enough power.
To Next Page
Loading...
Need help?
General
