DIGIWEB Fritz!Box 7430 - Manual Configuration Settings

To Next Page

To Previous Page

Manual Conﬁguration Settings

Please note that the Fritz!Box is pre-conﬁgured with the correct Digiweb

settings.Youshouldnotberequiredtochangethesesettings.Afactory

reset of the Fritz!Box as per page 14 will return the preconﬁgured settings

atanypoint.Howeverifconguringanalternate3rdpartyVDSLmodem,

thefollowingsettingsarerequired:

FIBRE VDSL SETTINGS:

• Encapsulation = PPPoELLC

• ATMSettings = Detectautomatically(recommendedsetting)

• Username = digiweb@nga.digiweb.ie

• Password = digiweb

• VLANID = 10

ADSL SETTINGS:

• Encapsulation = PPPoELLC

• ATMSettings = VPI:8VCI:35

• Username = digiweb@dsl.digiweb.ie

• Password = digiweb

• VLANID = notrequired