DIGIWEB Fritz!Box 7430 - Troubleshooting

13
Troubleshooting
LEDOperation
Power / DSL
Flashing: Connection / Sync is being established. Please ensure
DSL phone cable (D) is connected as per Step 3.
On (Solid): Connection / Sync is established. Connection should
now be online as per pre-configured settings.
Internet
(VOIP Phone Service)
Flashing: You have new messages in your Fritz!Box inbox.
On (Solid): AtelephoneconnectiononyourDigiwebVOIPservice
is active.
Fixed Line
(Phone Service)
Not applicable.
WLAN
Flashing: Adopting the Wireless/WiFi settings
On (Solid): Wireless / WiFi are active. Please refer to Step 7.
Info
Flashing: Configuring / Configurable e.g. firmware update.
DO NOT POWER OFF when this LED is flashing!
Red: Configuration error – please power o and on the Fritz!Box.
Contact Digiweb Technical Support if powering o and on does not
fix this.