DIHR HT 12 - LANGUAGE Selection; SET RINSE TEMP. Parameter; SET WASH TEMP. Parameter

USA
page 45
4.1.1 LANGUAGE Selection
By the D (decrease) key and the E (increase) key, select the parameter LANGUAGE.
Confi rm the selection by pressing the Start A key.
Choose the desired language (ITALIAN, ENGLISH, FRENCH, GERMAN, SPANISH, ...) by using the D (decrease) key and
the E (decrease) key.
Confi rm the selection by pressing the Start A key.
To exit the programming menu press the On/Off
C key.
4.1.2 SET RINSE TEMP. parameter
By the D (decrease) key and the E (increase) key, select the parameter SET RINSE TEMP. parameter.
Confi rm the selection by pressing the Start A key.
Set the desired boiler temperature (rinse) by using the D (decrease) and E (increase) keys.
Factory-set rinse temperature: 185°F (85°C)
The above indicated settings are valid for any cycle available on the machine.
Confi
rm the selection by pressing the Start A key.
To exit the programming menu press the On/Off
C key.
4.1.3 SET WASH TEMP. parameter
By the D (decrease) key and E (increase) key, select the SET WASH TEMP. parameter.
Confi rm the selection by pressing the Start A key.
LANGUAGE
^
^
^
^
ENGLISH
SET RINSE
TEMP
185°f
SET WASH
TEMP