Dimension One Spas – Reflections Owner’s Manual
24
Features Unique to Certain Models
Dynamic Massage Sequencer
If your spa is equipped with the Dynamic Massage Sequencer, it controls the jets in the
UltraLounge seating area to sequentially massage different muscle groups. When you select a
massage sequence, the human figure on the control panel displays corresponding lights, allowing
you to preview that sequence before starting it.
The Dynamic Massage Sequencer Control Panel
LIGHT Button
The LIGHT Button on the Dynamic Massage Sequencer works just like
the one on the topside control panel to turn the spa light on and off.
JETS Button
The JETS Button on the Dynamic Massage Sequencer turns the jet
pump associated with the Sequencer on or off. The same spa jet
pump jet may be turned on or off using the button on the topside
control panel.
SPEED Button
The SPEED Button changes the amount of time between each step of
the massage sequence. The default time is 5 seconds. Push the
SPEED Button once to change it to 15 seconds, again to change it to
30 seconds. A third push will return it to 5 seconds. The status light
below the SPEED Button will blink at the current speed.
To Next Page
Loading...
