EasyManua.ls Logo

DIMOEL NewROTOR User Manual

DIMOEL NewROTOR
94 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Kit NewROTOR
Kit automatización para cancelas correderas hasta 600 Kg
Kit automatização para portas corridas hasta 600 Kg
Kit for sliding gates up to 600 Kg
Kit pour automatiser portails coulissants jusqu’à 600 Kg
Bausätze für Schiebetore, die ein maximales Gewicht von
600 Kg haben
E
P
GB
F
D
I
L n. 061
E
DIZ. 20/03/2014
V
2 S.p.A.
Corso Principi di Piemonte, 65/67
12035 RACCONIGI (CN) ITALY
tel. +39 01 72 81 24 11
fax +39 01 72 84 050
i
nfo@v2home.com
www.v2home.com
Question and Answer IconNeed help?

Do you have a question about the DIMOEL NewROTOR and is the answer not in the manual?

DIMOEL NewROTOR Specifications

General IconGeneral
BrandDIMOEL
ModelNewROTOR
CategoryGate Opener
LanguageEnglish

Summary

IMPORTANT REMARKS

PARTS LIST

KIT COMPONENTS AND SPECIFICATIONS

Detailed list of kit components and their technical specifications.

PREPARATORY STEPS

INSTALLATION

General instructions for installing the gate automation system and its components.

INSTALLATION DETAILS

INSTALLING THE LIMIT SWITCHES

Instructions for correctly installing and wiring limit switches for gate operation.

MOTOR OVERRIDING SYSTEM

Procedure for manually operating the motor in case of power failure or other issues.

CONTROL UNIT DESCRIPTION

ADJUSTMENT OF THE POWER AND OPERATIONAL TIMES

PROGRAMMING THE OPERATIONAL LOGIC

DIP SWITCH FUNCTIONS

Detailed explanation of each dip-switch function and its settings.

MR2-U PLUG-IN RECEIVING MODULE

DECLARATION OF CONFORMITY

TECHNICAL DATA

Technical specifications including frequency, temperature, sensitivity, and dimensions.

PROGRAMMING

Guide to programming the receiver modes and functions.

RECEIVER PROGRAMMING PROCEDURES

PROGRAMMING THE MONOSTABLE FUNCTION

How to program the monostable function for the receiver.

PROGRAMMING THE BISTABLE FUNCTION

How to program the bistable function for the receiver (ROYAL system).

PROGRAMMING THE TIMER FUNCTION

How to program the timer function for the receiver (ROYAL system).

ADVANCED RECEIVER FUNCTIONS

FULL CODE ERASING

Procedure to erase all stored codes from the receiver.

SENSIVA-XS PHOTOCELLS

REMOTE CONTROLS (TSC-4 / TSP-4 / TRC-4 / TRP-4)

Related product manuals