To Next PageTo Next PageWhat to do if my Dimplex 690932 unit cycles through ‘Beeps” and changing On screen Display when turned on?
If your Dimplex Indoor Fireplace cycles through beeps and changes the on-screen display when turned on, unplug the unit, wait 20 minutes, and then plug it back in. This may resolve an improper initialization of electronics. If the issue persists, the heater assembly may be defective and require replacement.
What to do if my Dimplex Indoor Fireplace log set or media bed does not light up?
If the log set or media bed in your Dimplex Indoor Fireplace does not light up, check the wiring connections for any looseness. If the wiring is secure, the media LED light assembly, log set, log set junction board, or main control board may be defective and require replacement.
What to do if my Dimplex 690932 Indoor Fireplace section of colored lights does not light up or is a different color?
If a section of colored lights in your Dimplex Indoor Fireplace does not light up or displays a different color, the media LED light assembly may not be working and require replacement.
Why is there buzzing noise coming from my Dimplex Indoor Fireplace heater assembly?
A small amount of noise is normal, as there is a small current of electricity running through the motor. Excessive buzzing noise can be minimized by use of power regulator board installation.
What to do if my Dimplex Indoor Fireplace heater is not turning on, but flame effect is still functioning?
If the heater isn't turning on but the flame effect is still working, trace the wiring in the unit. Also, the main control board or heater assembly may be defective and require replacement.
General| Fuel Type | Electric |
|---|---|
| Flame Effect | Yes |
| Adjustable Thermostat | Yes |
| Remote Control | Yes |
| Voltage | 120V |
| BTU | 5100 BTU |
| Heating Area (Sq. Ft.) | 400 sq. ft. |
| Wattage | 1500W |
| Product Type | Fireplace |
