Dimplex 690932 Series

Other manuals for Dimplex 690932 Series

Questions and Answers

T
Tara GreerSep 23, 2025
What to do if Dimplex Indoor Fireplace does not turn on with gWave controls?
- S
  sheilacombsSep 23, 2025
  If your Dimplex Indoor Fireplace is not turning on with the gWave controls, refer to the Operation Section for proper usage. Also, check the fuse/breaker panel to ensure there is incoming voltage from the electrical wall socket. Loose wiring could also be the cause, so inspect the wiring connections. If none of these resolve the issue, the gWave assembly may be defective and require replacement.
B
brennanjessicaSep 23, 2025
Why is my Dimplex 690932 making excessive noise with the heater on?
- C
  costajenniferSep 23, 2025
  If your Dimplex Indoor Fireplace is making excessive noise with the heater on, it could be due to a dirty heater assembly. Ensure that the exterior intake louvers and firebox cavity are free of dirt and dust. If the noise persists, the heater assembly may be defective and require replacement.
S
Steven BrewerSep 23, 2025
Why doesn't the logset light up on my Dimplex Indoor Fireplace?
- J
  jessica56Sep 23, 2025
  If the logset or media bed of your Dimplex Indoor Fireplace does not light up, begin by checking the wiring connections for any looseness. If the wiring is secure, either the media LED light assembly or the logset itself may be defective and need replacement. In some cases, a defective electronics junction board or main control board could also be the cause, requiring replacement.
E
Eddie ThomasSep 23, 2025
Why is my Dimplex Indoor Fireplace making grinding noise?
- B
  Brian JohnsonSep 23, 2025
  If your Dimplex Indoor Fireplace is making grinding or excessive noise with the heater off, it could be that the flicker rod is hitting or rubbing against internal components. Ensure the rod is straight and mounted properly in the bracket, spinning freely away from other components; replace if necessary. Alternatively, the flicker motor may be defective and require replacement.
K
Kelly BoyerAug 31, 2025
What to do if my Dimplex 690932 unit cycles through ‘Beeps” and changing On screen Display when turned on?
- A
  Alicia JacksonAug 31, 2025
  If your Dimplex Indoor Fireplace cycles through beeps and changes the on-screen display when turned on, unplug the unit, wait 20 minutes, and then plug it back in. This may resolve an improper initialization of electronics. If the issue persists, the heater assembly may be defective and require replacement.
V
Vanessa MartinezAug 25, 2025
What to do if my Dimplex Indoor Fireplace heater emits an odor?
- W
  Wayne RosalesAug 25, 2025
  It's normal for the Dimplex Indoor Fireplace heater to emit an odor briefly when initially turned on, as it burns off dust accumulated during manufacturing or operation. If the odor persists, the heater assembly may be defective and require replacement.
M
Marilyn WilliamsAug 25, 2025
Why do lights dim in room when my Dimplex Indoor Fireplace is on?
- M
  Melissa HarrisAug 26, 2025
  The lights may dim because the Dimplex Indoor Fireplace is drawing close to the circuit's current rating. To resolve this, move the unit to another outlet or install it on a dedicated 15 amp circuit.
S
Sara WangAug 26, 2025
What to do if my Dimplex 690932 turns on/off by itself?
- G
  Gloria TaylorAug 26, 2025
  If your Dimplex Indoor Fireplace turns on and off by itself, the gWaveTM sensor might be triggered by an external force. Ensure the sensor area is clear of objects and that direct light beams or reflections aren't shining into the sensor. If the issue persists, you can deactivate the gWaveTM feature.
T
todd46Aug 27, 2025
What to do if my Dimplex 690932 heater is turning off after a couple of minutes?
- H
  Hailey WhitakerAug 27, 2025
  The Dimplex Indoor Fireplace heater might be turning off after a couple of minutes due to several reasons. First, ensure the set temperature is above the room temperature. Another potential cause is a buildup of dirt or dust in the heater assembly. Make sure that the exterior intake louvers and the fireplace cavity are free of dirt and dust. Finally, the heater assembly may be defective and require replacement.
A
April MossAug 27, 2025
Why is my Dimplex 690932 power cord getting warm?
- E
  ericahumphreyAug 27, 2025
  The power cord may get slightly warm to the touch when the heater is on, which is normal. However, if the cord gets hot to the touch, the power cord may be defective and should be replaced.

Dimplex 690932 Series Specifications

General

Fuel Type	Electric
Flame Effect	Yes
Adjustable Thermostat	Yes
Remote Control	Yes
Voltage	120V
BTU	5100 BTU
Heating Area (Sq. Ft.)	400 sq. ft.
Wattage	1500W
Product Type	Fireplace