Dimplex Chesford CSD20 User Manual

The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC)
EN55014, EN60555-2 and EN60555-3 These cover the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC
Cavendish CSH20, Chesford CSD20
08/50756/1 Issue 1

Dimplex Chesford CSD20 Specifications

General

Model Number	CSD20
Category	Indoor Fireplace
Heat Output	2 kW
Heat Settings	2
Thermostat	Yes
Remote Control	Yes
Colour	Black
Power Supply	230V
Type	Electric

Summary

Important Safety Advice

General Safety Precautions

Basic precautions for reducing risk of fire, electrical shock, and injury to persons.

Electrical Connection and Earthing

Details on AC supply, voltage correspondence, and earthing requirements.

General Product Information

Product Overview and Operation Notes

Describes flame effect, operating environment, sound, and retainer notes.

Installation Instructions

Chimney Preparation

Recommends chimney cleaning and blocking off the flue for efficiency.

Appliance Installation Steps

Steps for installing the fire into the fireplace and connecting power.

Controls and Operation

Manual Control Functions

Explains the functions of switches A, B, and control knobs C, D, and LED E.

Remote Control Operation

Details how to operate the fire using the remote control.

Appliance Safety and Operation

Battery Information and Disposal

Instructions for installing and disposing of batteries for the remote control.

Thermal Safety Cut-out

Explains the thermal safety cut-out and reset procedure.

Usage Tips and Maintenance

Advice on operation, water usage, and procedures like changing lamps and filling tank.

Cleaning Procedures

Water Tank and Sump Cleaning

Instructions for cleaning the water tank and sump components.

Air Filter Cleaning

Procedure for removing, rinsing, and replacing the air filter.

Product End of Life and Support

Recycling Information

Guidance on proper disposal of electrical products.

After Sales Service and Warranty

Information on product guarantee, repairs, and obtaining assistance.

Troubleshooting

Flame Effect Not Starting

Diagnosing and resolving issues with the flame effect not initiating.

Flame Effect Issues

Addressing low flame intensity, excessive smoke, or smell.

Lamp and Smoke Generator Problems

Troubleshooting when main lamps are not working or no flames/smoke appear.