To Next PageTo Next PageWhy is my Dimplex Indoor Fireplace flame not bright or not visible?
A dim or invisible flame in your Dimplex Indoor Fireplace could be due to burnt-out light bulbs, which need replacement. It could also be caused by loose wiring, so check the wiring connections. A defective light harness might also be the culprit, requiring its replacement.
Why is the power cord getting warm on my Dimplex Indoor Fireplace?
A slightly warm power cord during heater operation is normal for your Dimplex Indoor Fireplace. However, if the cord becomes hot to the touch, it may be defective and should be replaced.
What to do if my Dimplex Indoor Fireplace is turning on and off by itself?
If your Dimplex Indoor Fireplace is turning on and off by itself, it could be due to several reasons: * The remote control having a similar frequency to other remotes in the area. * Radio frequency disturbance from outside sources. * A defective remote control receiver. In any of these cases replace Remote Control or Remote Control Receiver and initialize to Remote Control Receiver.
How to fix excessive noise with the heater on in my Dimplex Indoor Fireplace?
Excessive noise with the heater on in your Dimplex Indoor Fireplace can be caused by a dirty heater assembly. Ensure that the exterior intake louvers and firebox cavity are free of dirt and dust. If the noise persists, the heater assembly may be defective and require replacement.
What to do if my Dimplex Indoor Fireplace heater is not turning on?
If the heater on your Dimplex Indoor Fireplace isn't turning on, the issue could be due to loose wiring, which requires tracing the wiring in the unit. Alternatively, a defective heater switch, thermostat, or heater assembly could be the cause, and each of these components may need to be replaced.
What to do if my Dimplex NBDF2608 Indoor Fireplace is not turning on?
If your Dimplex Indoor Fireplace isn't turning on manually, first check the fuse/breaker panel to ensure there's incoming power from the electrical wall socket. If power is available, the issue might be a defective 3-Position Switch, which would need replacement.
Why does my Dimplex NBDF2608 heater emit an odor?
A brief odor from your Dimplex Indoor Fireplace heater upon initial use is normal. This occurs as the heater burns off dust accumulated during manufacturing or operation. However, a persistent odor could indicate a defective heater assembly, in which case you should replace the heater assembly.
General| Brand | Dimplex |
|---|---|
| Model | NBDF2608 |
| Category | Indoor Fireplace |
| Language | English |
