NOTE:
In all modes, except holiday mode, and can be used to adjust
the required room temperature.
NOTE:
It is recommended that the timer is used as doing so can reduce
the running cost. Operating the appliance in the permanent heating
modes as Boost, Auto Boost or Setback may result in increased
running costs.
Modes of Operation
The heater comes pre-programmed with a set of heating pro• les. There are three options
available - two pre-programmed and one user adjustable timer;
1. User Timer (pre-programmed, factory default) - provides greatest ! exibility to the user.
Four time slots are available throughout the day and these can be customised for each
day of the week. Factory default times: 06.30 until 09.30, 11.00 until 13.00, 15.00 until
17.00, 18.00 until 22.00.
2. Out All Day (pre-programmed) - has the following preset times Monday to Sunday,
which can be altered if desired 07.00 until 08.30 17.30 until 22.00, (factory default times).
3. Holiday - set the date of return and the temperature required. 7°C is advised if you just
want to protect the property from frost while you are away.
The heater can also maintain a constant room temperature using the following modes;
1. Boost mode heats the room to a selected temperature for 1, 2 or 3 hours..
2. Auto Boost Function maintains a room temperature during comfort periods, when the
core is depleted.
3. Setback mode maintains a room temperature outside comfort periods. This mode
should be used to provide protection against frost or where big drops in temperature are
unwanted.
19
To Next Page
Loading...
Need help?
General
