DINGLI JCPT0407 - Operating Instructions; Error Indicators and Battery Safety

25
OPERATOR’S MANUAL with Maintenance Information
Operating Instructions
Error indicator readout
If the LED diagnostic readout displays an error code, such as LL, push in and pull
out the red Emergency Stop button to reset the system.
List of Fault Codes
Display
Description
Lift Reaction
01
System initialization Fault (May display 10 on PCU)
Disables All Motion
02
System communication Fault (May display 20 on PCU)
Disables All Motion
03
Invalid option setting Fault
Disables All Motion
10
As seen on PCU: System initialization Fault
Disables All Motion
12
Chassis Up/Down Switch ON at Power-up
Disable Chassis Control
20
As seen on PCU: System communication Fault
Disables All Motion
31
Pressure Sensor Fault
Disables All Motion
32
Angle Sensor Fault
Disables All Motion
36
Battery Low Fault
Disables Drive Fast and
Lifting functions
42
Platform Left Turn Switch ON at power-up Message
Diagnostic Message Only
43
Platform Right Turn Switch ON at power-up Message
Diagnostic Message Only
46
Platform Joystick Enable Switch ON at power-up Fault
Disable Platform Control
47
Platform Joystick not in neutral at power-up Message
Diagnostic Message Only
54
Lift Up Coil Fault
Disable Lifting and Driving
55
Lift Down Coil Fault
Disable Lifting and Driving
56
Right Turn Coil Fault
Disable Lifting and Driving
57
Left Turn Coil Fault
Disable Lifting and Driving
58
General Brake Coil Fault
Disable Lifting and Driving
61
Motor Controller Current Sensor Fault
Controller Dependent
62
Motor Controller Hardware or Software Fault
Controller Dependent