EasyManua.ls Logo

DINGLI JCPT0807HA - Crushing Hazard

DINGLI JCPT0807HA
117 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATOR’S MANUAL with Maintenance Information
Safety Rules
6
37 kg. The batteries must weigh a minimum of
148 kg (For JCPT1412HA/AC,
JCPT1612HA/AC, JCPT1612HAS/ACS).
Do not modify or alter an aerial work platform
without prior written permission from the
manufacturer. Mounting attachments for
holding tools or other materials onto the
platform, toe boards or guard rail system can
increase the weight in the platform and the
surface area of the platform or the load.
Do not place ladders or scaffolds in the
platform or against any part of this machine.
Do not transport tools and materials unless
they are evenly distributed and can be safely
handled by person(s) in the platform.
Do not use the machine on a moving or mobile
surface or vehicle.
Be sure all tires are in good condition, air-filled
tires are properly inflated and lug nuts are
properly tightened.
Crushing Hazard
Keep hands and limbs out of scissors.
Keep hands clear when folding rails.
Maintain a firm grasp on the platform rail when
removing the rail pins. Do not allow the
platform guard rails to fall.
Use common sense and planning when
operating the machine with the controller from
the ground. Maintain safe distances between
the operator, the machine and fixed objects.
Operation on Slopes Hazard
Do not drive the machine on a slope that
exceeds the slope and side slope rating of the
machi ne.
Slope rating applies to machines only in the
stowed position.
Maximum slope rating stowed
Maximum side slope rating stowed
Model A B
JCPT0807HA 25% (1) 25% (1)
JCPT0808HA 25% (1) 25% (1)
JCPT0812HA 25% (1) 25% (1)
JCPT1008HA 25% (1) 25% (1)
JCPT1012HA 25% (1) 25% (1)
JCPT1212HA 25% (1) 25% (1)
JCPT1412HA 25% (1) 25% (1)
JCPT1612HA 25% (1) 25% (1)
JCPT1612HAS 25% (1) 25% (1)
JCPT0807AC 25% (1) 25% (1)
JCPT0808AC 25% (1) 25% (1)
JCPT0812AC 25% (1) 25% (1)
JCPT1008AC 25% (1) 25% (1)
JCPT1012AC 25% (1) 25% (1)
JCPT1212AC 25% (1) 25% (1)
JCPT1412AC 25% (1) 25% (1)
JCPT1612AC 25% (1) 25% (1)
JCPT1612ACS 25% (1) 25% (1)

Table of Contents

Related product manuals