DINGLI JCPT0807HA - Decals

OPERATOR’S MANUAL with Maintenance Information
Decals
12
Decal Inspection
Use the pictures on the next page to verify that all decals are legible and in place.
Below is a numerical list with quantities and descriptions.
JCPT0807HA/AC
No. Part No. Description Qty. Remark
1 09440011 Decal, Label-Lanyard anchorage point 4
2 09340001 Decal, Notice-Keep the manual with the machine 1
3 09440003 Decal, Danger-Tip-over hazard, tilt-alarm 1
4 09440001 Decal, Danger-General safety rules 1
5 09340003
Decal, Instructions-Refer the operator to the
instructions for use
2
6 09440070 Decal, Label-Capacity 230kg 1
7 09310001 Decal, Instructions-Forklift pockets 2
8 09310003 Decal, Instructions-Tie down point 4
9 09310002 Decal, Instructions-Lift point 4
10 09310233 Decal, Instructions-Maximum wheel load 710kg 4
11 09310064 Decal, Notice-Main power switch operation 1
12 09540001 Decal, Label-CE 3
13 09410129 Decal, Warning-Charge warning 1
14 09410001 Decal, Danger-Explosion/burn hazard 1
15 09330001 Decal, Danger-Safety arm 2
16 09440009
Decal, Caution-Max. manual force 400N (Indoor)
200N (Outdoor)
2
17
09640123 Decal, Label-JCPT0807HA 2
09640122 Decal, Label-JCPT0807AC 2
18 09410005 Decal, Danger-Do not alter or disable limit switch 1
19 09430003 Decal, Danger-Keep away from moving parts 1
20 09310004 Decal, Instructions-Emergency lower 1
21 09410003 Decal, Warning-Inspected and operation properly 1