Dinolift 265RXT - Safety and the Environment

8
DINO RXT
1.2. SAFETY AND THE ENVIRONMENT
1.2.1. General safety instructions for maintenance
Excercice extreme caution in all service, maintenance, toubleshooting and repair works. A
faulty device or a device where covers, safety devices or other parts have been removed or
disabled, may function in an unexpected way.
If, during maintenance, it is necessary to disable a safety device, make sure that it is
returned to use and works correctly before using the device.
Beware of sudden and unexpected movements.
Support the platform, boom system, articulated arms and support outriggers in a position in
whichtheloaddoesnotrestonthestructureunderrepairorcauseanyotherdanger(e.g.
transportpositionoruseofsupportingstructures)
While removing hydraulic cylinders, note, that
• they may be oily and slippery
• the cylinders are heavy. Use a suitable crane and lifting accessories for lifting.
Do not let oil spill to the ground
Used oils and oily waste must be properly disposed of. Note the national and local recycling
and waste policies and regulations.
Remember when handling batteries:
Electrolyticliquidishighlycorrosive-Alwayswearprotectiveclothingandeyewear.
Thebatteryemitsanexplosivegaswhilecharging-keepawayfromopename.Explosion
hazard.
Use genuine spare parts. Doing so, you ensure the correct functioning and structural safety
even after major repairs.