Dinstar DAG1000-8O - User Manual

Quick Installation Guide
DAG1000-4O
DAG1000-8O
DAG2000-16O
Thanks for Choosing Dinstar’s VoIP Gateway!
Please read this guide carefully before installing the gateway. If you need any technical
support, .please contact us
Tel: +86 755 61919966
Email: support@dinstar.com
Website: www.dinstar.com
DAG3000-32O
DAG3000-128O
v2. 0 2021

Summary

Description of Indicators

Indicators & Interfaces

Installation Attentions

Power Supply Requirements

Installation Instructions

DAG1000-40 Connection Diagram

Illustrates network, PSTN, and power connections for DAG1000-40.

DAG1000-80 Connection Diagram

Illustrates network, PSTN, and power connections for DAG1000-80.

DAG2000-160 Connection Diagram

Illustrates network, PSTN, and power connections for DAG2000-160.

DAG3000-320 Connection Diagram

DAG3000-1280 Connection Diagram

Modify PCs IP Address

Step 1: Access Network Properties

Step 2: Select TCP;IPv4 Properties

Step 3: Set Static IP Address

Log in Web Management System

Modify Gateways IP Address

Basic Configurations

Create Port Group

Organize PSTN lines into logical groups for management and routing.

Create IP Trunk

Establish IP trunks to connect the gateway with a peer SIP server.

Create Outbound Route

Define rules for routing calls from IP trunks to specific port groups.

Create Inbound Route

Define rules for routing calls from port groups to specific IP trunks.

Configure FXO Parameters

Configure Impedance Value

Dinstar DAG1000-8O Specifications

General

Brand	Dinstar
Model	DAG1000-8O
Category	Gateway
Language	English