36
© 2005 directed electronics, inc.
If the system has entered the triggered sequence (siren has begun
chirping), pressing the disarm button of the transmitter will not
disarm VRS
®
. To disarm the VRS
®
during a VRS
®
trigger sequence:
1. Turn the ignition on.
2. Press the Valet button the pre-
programmed number of times to
disarm the VRS
®
system.
pprrooggrraammmmiinngg ooppttiioonnss
See your dealer for further details on the options listed below
available with this system.
Automatic Engine Disable
: Prevents the vehicle from being started
even if the vehicle is not armed after turning the ignition Off and
exiting the vehicle.
Comfort Closure
: Windows will close upon locking the vehicle.
Dual Sensor Trigger
: If programmed both the onboard and at
least one of the optional sensors need to be triggered within 1-
second of each other for full alarm.
note: If the VRS
®
system has begun its chirping sequence,
the ignition must be turned off, then on to disarm. If you
are driving the vehicle at the time, pull to a safe place
away from traffic and follow the triggered sequence dis-
arm procedure.
To Next Page
Loading...
Need help?
General
