To Next PageTo Next Page
Need help?Do you have a question about the Directed Electronics Clifford 20.7X and is the answer not in the manual?
General| Number of Buttons on Remotes | 4 |
|---|---|
| Range | Up to 1/4 mile |
| Remote Control | Yes |
| Keyless Entry | Yes |
| Starter Kill | Yes |
| LED Indicator | Yes |
| Panic Mode | Yes |
| Valet Mode | Yes |
| Compatibility | Most vehicles |
| Shock Sensor | Yes |
Details the wiring connections for the 12-pin Main Harness (H1) and 18-pin H2 Harness.
Details the wiring connections for the 8-pin Remote Start (H3) and 3-pin Door Lock harnesses.
Steps to program the Virtual Tach feature for engine checking.
Procedure to teach the system the vehicle's tach signal.
Explains the neutral safety switch and provides testing procedures.
How to interpret LED flashes for remote start shutdown reasons.
Configures locking modes, panic activation, and horn duration.
Controls door lock/unlock behavior based on ignition status.
Configures comfort closure and door/hood switch types.
Sets one-time bypass, door error chirp, and dome light activation.
Configures OEM alarm disarm and auxiliary output types and linking.
Sets the output type for the auxiliary/trunk function.
Selects transmission mode (Auto/Manual) and engine checking method.
Sets starter crank duration and maximum remote start runtime.
Configures turbo mode activation and timer-based remote start runtime.
Manages diesel start delay, accessory operation, and status outputs.
Configures icon types and timed outputs for auxiliary channels.
Sets temperature thresholds for smart start and adjusts starter fine-tune.
Locks/unlocks feature programming and transmitter access.
Adjusts crank time for Virtual Tach mode to optimize engine starting.
Addresses problems with door locks operating in reverse.
Covers issues with activation, starter engagement, and engine dying.
Addresses engine starting but running briefly or starter continuously running.
Troubleshoots the engine running only for a short period and other runtime problems.
Explains why climate control may not function during remote start operation.
Guides through diagnosing MTS issues and mode exiting problems.
