3
© 2016 Directed. All rights reserved.
Remote Control
Feature Description
Internal Antenna Used for transmitting information
Transmit LED Active when transmitting information
Command buttons (4)
AUX
AUX
AUX
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
AUX
AUX
AUX
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
Used to perform:
Locking
Unlocking
Remote Start
Silent mode/Auxiliary channel*
* On some remote controls, the
icon may exist instead of the
icon. This guide uses the icon throughout, but function-
ality is the same regardless of which one of these icons is used
with your system.
Remote Control Functions
The remote buttons are used to send commands to the system. The but-
tons indicated below are for standard configuration.
Standard Configuration
AUX
AUX
AUX
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
Button
The lock function is controlled by pressing
AUX
AUX
AUX
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
on the remote control
for one second. When held for approximately two seconds, Panic is
activated.
To Next Page
Loading...
Need help?
General
