Directed VOXX DEI DS3+ - Installation; Wiring Diagram with T-Harness (THHON11) with Vehicle Takeover

5
933.HONDA9 2.10.198.12 2022 Honda HR-V (Smart Key)
©2023 Directed. All rights
Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).
Violet/Black
Starter Disable loop.
Wiring diagram with T-Harness (THHON11) with Vehicle Takeover
Keyless Access Control Unit
(gray 20-pin connector)
Keyless Access Control Unit
(gray 36-pin connector)
8-pin White Connector
22-pin White Connector
12-pin Black Connector
Relay Pack
5A Fuse Inside
(black, 2-pin connector)
(black, 2-pin connector)
Steering Lock Module
(12-pin gray connector
under steering column)
(-) Parking Lights Output: Lt. Blue/Black
(-) GWA Output: Red/White
Siren
Hood Pin
Refer to the
Optional Starter Disable
Connection section for relay
and connection details.
(-) Parking Lights:
Gray, pin 8
Headlight Switch
(white connector)
123456
7
8
9101112
12
12
Keyless Acces Control Unit
(behind instrument cluster)
(+) Siren Output: Brown/Red
(-) Hood Input: Gray
Connect
Steering Lock
THHON11
(optional t-harness)
Security Only
Mandatory Connections
Remote Start Only
Legend:
Remote Start + Security
22 812
4 2442
Slide to open
A module can also be used for
this installation.
IMPORTANT:
Position the
fuses correctly!
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3/PK LIGHT (15A) (+)
5
5
30
20
20
15
15