Directed XPRESSKIT optimax Series User Manual

CHALL
Remote car starter and alarm interface
Interface pour démarreurs à distance et
systèmes de sécurité
INSTALLATION
GUIDE
© 2011-2012 Directed Electronics. All rights reserved.
www.xpresskit.com
Rev: 20120227
Update Alert: Firmware updates are posted to the web on a regular
basis. We recommend you check for firmware and/or install guide
updates prior to installing this product.
Avertissement de mise à jour : Des mises à jour de micrologiciels sont
affichées sur le Web sur une base régulière. Nous vous
recommendons de vérifier si des mises à jour de micrologiciels et/ou
de guides d’installation sont disponibles avant d’installer ce produit.
tm
D I G I T A L O E M I N T E G R A T I O N
REQUIRED FIRMWARE VERSION 2.08 or up
Version requise du micrologiciel 2.08 et plus

Directed XPRESSKIT optimax Series Specifications

General

Brand	Directed
Model	XPRESSKIT optimax Series
Category	Automobile Accessories
Language	English

Summary

Installation Guide

Vehicle Fit Guide

Connection A: CHTH1 with D2D

Wiring Diagram and Pinout (D2D)

Illustrates the CHTH1 connection with D2D, detailing wire functions and pin assignments.

Connection B: CHTH1 without D2D

Wiring Diagram and Pinout (No D2D)

Illustrates the CHTH1 connection without D2D, detailing wire functions and pin assignments.

Connection C: CHTH2 with D2D

Connection D: CHTH2 without D2D

Connection E: CHTH2 with D2D

Connection F: CHTH2 without D2D

Programming Procedure - Part 1

Steps 7-9: Initial Programming

Covers connector insertion, ignition cycles, and remote unlock button press.

Step 10: Ignition Off and LED State

Details turning the ignition off and observing the Red LED state.

Programming Procedure - Part 2

Step 11: OEM Remote Programming

Explains programming using the vehicle's OEM remote LOCK button.

Step 12: Vehicle Start Confirmation

Describes starting the vehicle and observing LED feedback for confirmation.