How to fix Directed Automobile Accessories module if it has no power?
If the Directed automobile accessory module has no power, ensure the D2D harness is connected and that there is 12 Volts present between the red and black wires. If 12 Volts is present, it's possible the module is defective.
What to do if CAN1 is not detected in Directed DIRECTWIRE DIRECTECHS THGMN4?
If CAN1 is not detected by your Directed Automobile Accessories, check the CAN1 Tan and Tan/Black wire connections. Try waking up the data bus by turning the ignition on and trying again. If your installation does not require this connection, you can skip this step by pressing the programming button 5 times.
What to do if bypass data is not detected in Directed DIRECTWIRE DIRECTECHS THGMN4 Automobile Accessories?
If the Directed Automobile Accessories is not detecting bypass data, check the bypass line connection. If you're using more than one wire, ensure they are not inverted. Also, make sure the vehicle still operates correctly using the factory key.
What to do if CAN2 is not detected in Directed Automobile Accessories?
If CAN2 is not detected in your Directed Automobile Accessories, check the CAN2 Orange/Green and Orange/Brown wire connections. Wake up the data bus by turning the ignition on and try again. If your installation does not require this connection, skip this step by pressing the programming button 5 times.
What to do if initialization failed for Directed Automobile Accessories?
If the Directed Automobile Accessories initialization failed, reset the module and complete the programming again. If the issue continues, no other solution is available.
What to do if J1850 is not detected in Directed DIRECTWIRE DIRECTECHS THGMN4 Automobile Accessories?
If J1850 is not detected by your Directed Automobile Accessories, check the J1850 wire connection. You can also try waking up the data bus by turning the ignition on and trying again.
What causes bypass processing error in Directed DIRECTWIRE DIRECTECHS THGMN4?
If the Directed Automobile Accessories experiences a bypass processing error because the bypass calculation failed, reset the module and try again. If the condition persists, no other solution is available.
What to do if transponder functions were skipped in Directed Automobile Accessories?
If transponder functions were skipped in your Directed Automobile Accessories, and if compatible, when RXT mode is not desired or convenience features are needed, reset and reprogram the module.
What does it mean if OBDII feature is not supported in Directed Automobile Accessories?
If the OBDII feature is not supported in your Directed Automobile Accessories, the diagnostic data bus was not detected, therefore the SmartStart features will be limited.
What causes DEI feature error in Directed DIRECTWIRE DIRECTECHS THGMN4?
If the Directed Automobile Accessories experiences a DEI feature error due to a feature config file mismatch, no other solution is available.
General| Brand | Directed |
|---|---|
| Model | DIRECTWIRE DIRECTECHS THGMN4 |
| Category | Automobile Accessories |
| Language | English |
To Next Page