What to do if CAN2 is not detected on Directed DB3 Automobile Accessories?
If CAN2 isn't being detected by your Directed Automobile Accessories, check the connections of the Orange/Green and Orange/Brown wires. Wake up the data bus by turning the ignition on and try again. If your installation does not require this connection, skip this step by pressing the programming button 5 times.
What to do if Directed DB3 Automobile Accessories bypass data is not detected?
Check the connection of the bypass line. If multiple wires are used, ensure they are not inverted. Also, verify that the vehicle operates correctly with the factory key.
Why Directed DB3 Automobile Accessories transponder functions were skipped?
If the Directed Automobile Accessories system indicates 'Transponder functions were skipped' when RXT mode is not desired or convenience features are needed, please reset and reprogram the module.
What to do if J1850 is not detected on my Directed DB3 Automobile Accessories?
If the J1850 is not detected by your Directed Automobile Accessories device, check the J1850 wire connection. You may also need to wake up the data bus by turning the ignition on and try again.
Why was the brake not detected by my Directed DB3 Automobile Accessories?
The brakes were not detected by your Directed Automobile Accessories device, which prevents the system from shutting down the vehicle.
What does MUX not detected mean for Directed Automobile Accessories?
If MUX is not being detected by your Directed Automobile Accessories, the Violet/Green or Violet/Brown wire didn't detect the expected voltage value. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
Why was speed detected by Directed Automobile Accessories?
The vehicle was detected as moving, which prevents the system from shutting it down.
What to do if I get a bypass processing error on my Directed Car Alarm?
If you encounter a bypass processing error with your Directed Car Alarm, reset the module and try again. If the condition persists, further assistance may be needed.
What to do if initialization failed on my Directed DB3 Automobile Accessories?
If initialization failed on your Directed Automobile Accessories device, reset the module and complete the programming again. If the issue persists, please contact Technical Support.
What to do if MUX is not detected in Directed DB3?
The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Check the connections.
General| Brand | Directed |
|---|---|
| Model | DB3 |
| Category | Automobile Accessories |
| Language | English |
Describes the DB3 as a universal, flashable data-bus interface module.
Highlights the DB3's capability to cover over 90% of vehicles on the road today.
Lists features like RSR/RXT compatibility, programmable functions via Directechs, and RF loop support.
Details compatibility with RSR, RXT, SmartStart, and 3X Lock Start systems.
Mentions the ability to configure the module using a flash module.
Explains the warranty for Directed interfaces ensuring high-speed digital connectivity and error-free data exchange.
Warns users to check for hood detection switches before servicing to prevent unexpected restarts.
To Next Page
