To Next Page
M
Mr. Ruben SnyderSep 18, 2025
What to do if Directed Automobile Accessories J1850 is not detected?
- ZzmitchellSep 18, 2025
Check the J1850 wire connection. Wake up the data bus by turning the ignition on and try again.
What to do if Directed Automobile Accessories J1850 is not detected?
Check the J1850 wire connection. Wake up the data bus by turning the ignition on and try again.
What does it mean if Directed Automobile Accessories says MUX not detected?
If the Directed Automobile Accessories system indicates 'MUX not detected', the Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
What does bypass processing error mean for Directed DB3?
If you encounter a bypass processing error with your Directed Automobile Accessories, reset the module and try again. If the problem continues, please contact Technical Support.
What to do if the CAN bus is incorrectly detected in Directed Automobile Electronics?
If the CAN bus is being incorrectly detected by your Directed Automobile Electronics, verify the CAN1 and CAN2 connections. Refer to 'Installation (wiring diagrams & vehicle wiring reference charts)' to check the connections.
What to do if CAN2 is not detected on Directed DB3 Automobile Accessories?
If CAN2 isn't being detected by your Directed Automobile Accessories, check the connections of the Orange/Green and Orange/Brown wires. Wake up the data bus by turning the ignition on and try again. If your installation does not require this connection, skip this step by pressing the programming button 5 times.
Why Directed Remote Starter brake was not detected?
The brakes were not detected, which prevents the system from shutting down the vehicle.
What does 'Runsafe was not disabled' mean for Directed DB3 Automobile Accessories?
If the Directed Automobile Accessories system indicates that Runsafe was not disabled, it means that no UNLOCK command was received prior to opening the door, or the 45 second timer expired in takeover mode.
Why Directed Automobile Accessories Runsafe was not disabled?
No UNLOCK command was received prior to opening the door, or the 45 second timer expired in takeover mode.
What does it mean if Directed Door locks transponder functions were skipped?
If RXT mode is not desired or convenience features are needed (if compatible), reset and reprogram the Directed Door locks module.
Why Directed DB3 Automobile Accessories transponder functions were skipped?
If the Directed Automobile Accessories system indicates 'Transponder functions were skipped' when RXT mode is not desired or convenience features are needed, please reset and reprogram the module.
Describes the DB3 as a universal, flashable data-bus interface module.
Highlights the DB3's capability to cover over 90% of vehicles on the road today.
Lists features like RSR/RXT compatibility, programmable functions via Directechs, and RF loop support.
Details compatibility with RSR, RXT, SmartStart, and 3X Lock Start systems.
Mentions the ability to configure the module using a flash module.
Explains the warranty for Directed interfaces ensuring high-speed digital connectivity and error-free data exchange.
Warns users to check for hood detection switches before servicing to prevent unexpected restarts.
General| Brand | Directed |
|---|---|
| Model | DB3 |
| Category | Automobile Accessories |
| Language | English |
