What does it mean if Directed Automobile Accessories says MUX not detected?
If the Directed Automobile Accessories system indicates 'MUX not detected', the Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
Why is Directed Automobile Accessories waiting to begin the programming sequence?
If the Directed Automobile Accessories system is waiting to begin the programming sequence, ensure the correct programming procedure is being followed.
Why Directed Automobile Accessories brake was not detected?
The brakes were not detected, which prevents the system from shutting down the vehicle.
What to do if J1850 not detected on Directed DB3 Automobile Accessories?
If J1850 is not being detected by your Directed Automobile Accessories, check the J1850 wire connection. Wake up the data bus by turning the ignition on and try again.
What does bypass processing error mean for Directed DB3?
If you encounter a bypass processing error with your Directed Automobile Accessories, reset the module and try again. If the problem continues, please contact Technical Support.
Why is my Directed Automobile Accessories waiting to begin programming?
If your Directed Automobile Accessories module is stuck waiting to begin the programming sequence, double-check that you're following the correct programming procedure.
What to do if CAN2 is not detected on Directed DB3 Automobile Accessories?
If CAN2 isn't being detected by your Directed Automobile Accessories, check the connections of the Orange/Green and Orange/Brown wires. Wake up the data bus by turning the ignition on and try again. If your installation does not require this connection, skip this step by pressing the programming button 5 times.
What does a feature error mean on Directed Automobile Electronics?
A feature error on your Directed Automobile Electronics indicates that an RSR feature file mismatch was detected. Contact Technical Support.
What to do if Directed Automobile Electronics CAN bus incorrectly detected?
Verify the CAN1 and CAN2 connections.
What to do if Directed Automobile Accessories shows 'ISO 2 not detected'?
If the Directed Automobile Accessories module displays 'ISO 2 not detected', it means the Orange/Black wire didn't detect the expected signal. Check the connections, referring to “Installation (wiring diagrams & vehicle wiring reference charts)”.
Describes the DB3 as a universal, flashable data-bus interface module.
Highlights the DB3's capability to cover over 90% of vehicles on the road today.
Lists features like RSR/RXT compatibility, programmable functions via Directechs, and RF loop support.
Details compatibility with RSR, RXT, SmartStart, and 3X Lock Start systems.
Mentions the ability to configure the module using a flash module.
Explains the warranty for Directed interfaces ensuring high-speed digital connectivity and error-free data exchange.
Warns users to check for hood detection switches before servicing to prevent unexpected restarts.
General| Brand | Directed |
|---|---|
| Model | DB3 |
| Category | Automobile Accessories |
| Language | English |
To Next Page
