What does 'Speed was detected' mean on my Directed DB3 Automobile Accessories?
If your Directed Automobile Accessories system is displaying 'Speed was detected,' it means the vehicle was detected as moving, which prevents the system from shutting it down.
What does 'Runsafe was not disabled' mean for Directed DB3 Automobile Accessories?
If the Directed Automobile Accessories system indicates that Runsafe was not disabled, it means that no UNLOCK command was received prior to opening the door, or the 45 second timer expired in takeover mode.
Why is Directed Automobile Accessories waiting to begin the programming sequence?
If the Directed Automobile Accessories system is waiting to begin the programming sequence, ensure the correct programming procedure is being followed.
What does it mean if Directed Automobile Accessories says MUX not detected?
If the Directed Automobile Accessories system indicates 'MUX not detected', the Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
What does it mean if Directed Automobile Accessories PTS shutdown error occurred?
The PTS output from the Directed module was not activated due to safety protection.
What to do if Directed Door locks initialization failed?
Reset the Directed Door locks module and complete the programming again.
What does it mean if Directed Automobile Accessories says ISO 2 not detected?
If the Directed Automobile Accessories system indicates 'ISO 2 not detected,' it means the Orange/Black wire did not detect the expected signal. Consult the “Installation (wiring diagrams & vehicle wiring reference charts)” to verify the connections.
What does 'PTS shutdown error' mean in Directed DB3?
If the Directed Automobile Accessories system indicates 'PTS shutdown error,' the PTS output from the module was not activated due to safety protection.
What does 'RFTD disabled' mean in Directed DB3 Automobile Accessories?
If the Directed Automobile Accessories system indicates 'RFTD disabled,' 3x OEM Lock Remote Start Activation was attempted when the RFTD feature is disabled. Make sure 3x Lock Start is selected from the web in the flashing process.
What does a feature error mean in Directed Automobile Accessories?
If the Directed Automobile Accessories system indicates a feature error, an RSR feature file mismatch was detected. Please contact Technical Support.
Describes the DB3 as a universal, flashable data-bus interface module.
Highlights the DB3's capability to cover over 90% of vehicles on the road today.
Lists features like RSR/RXT compatibility, programmable functions via Directechs, and RF loop support.
Details compatibility with RSR, RXT, SmartStart, and 3X Lock Start systems.
Mentions the ability to configure the module using a flash module.
Explains the warranty for Directed interfaces ensuring high-speed digital connectivity and error-free data exchange.
Warns users to check for hood detection switches before servicing to prevent unexpected restarts.
General| Brand | Directed |
|---|---|
| Model | DB3 |
| Category | Automobile Accessories |
| Language | English |
To Next Page
