What to do if Directed Remote Starter CAN bus incorrectly detected?
Verify the CAN1 and CAN2 connections. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
Why Directed Remote Starter Runsafe was not disabled?
No UNLOCK command was received prior to opening the door, or the 45 second timer expired in takeover mode.
Why Directed Remote Starter brake was not detected?
The brakes were not detected, which prevents the system from shutting down the vehicle.
Why Directed Remote Starter smart key was not detected?
The smart key was not detected, which prevents the system from shutting down the vehicle.
Why Directed Remote Starter speed was detected?
The vehicle was detected as moving, which prevents the system from shutting it down.
Why Directed Remote Starter RFTD disabled?
3x OEM Lock Remote Start Activation was attempted when the RFTD feature is disabled. Make sure 3x Lock Start is selected from the web in the flashing process.
What to do if Directed Remote Starter feature error?
An RSR feature file mismatch was detected. Please contact Technical Support.
What causes bypass processing error in Directed DB3?
If you encounter a bypass processing error with your Directed Automobile Accessories, reset the module and try again. If the condition persists, please contact Technical Support.
Why is CAN bus incorrectly detected in Directed DB3?
If the CAN bus is incorrectly detected by your Directed Automobile Accessories, verify the CAN1 and CAN2 connections. Refer to 'Installation (wiring diagrams & vehicle wiring reference charts)' to check the connections.
What does it mean if OBDII feature is not supported in Directed Automobile Accessories?
If the OBDII feature isn't supported in your Directed Automobile Accessories, it means the diagnostic data bus wasn't detected, which will limit the SmartStart features.
General| Brand | Directed |
|---|---|
| Model | DB3 |
| Category | Automobile Accessories |
| Language | English |
Describes the DB3 as a universal, flashable data-bus interface module.
Highlights the DB3's capability to cover over 90% of vehicles on the road today.
Lists features like RSR/RXT compatibility, programmable functions via Directechs, and RF loop support.
Details compatibility with RSR, RXT, SmartStart, and 3X Lock Start systems.
Mentions the ability to configure the module using a flash module.
Explains the warranty for Directed interfaces ensuring high-speed digital connectivity and error-free data exchange.
Warns users to check for hood detection switches before servicing to prevent unexpected restarts.
To Next Page
