What to do if Directed Automobile Accessories ISO 2 is not detected?
The Orange/Black wire did not detect the expected signal. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
What to do if Directed Automobile Accessories MUX is not detected?
The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
Why Directed Automobile Accessories PTS shutdown error occurred?
The PTS output from the module was not activated due to safety protection.
Why Directed Automobile Accessories Runsafe was not disabled?
No UNLOCK command was received prior to opening the door, or the 45 second timer expired in takeover mode.
Why Directed Automobile Accessories brake was not detected?
The brakes were not detected, which prevents the system from shutting down the vehicle.
Why Directed Automobile Accessories smart key was not detected?
The smart key was not detected, which prevents the system from shutting down the vehicle.
Why Directed Automobile Accessories speed was detected?
The vehicle was detected as moving, which prevents the system from shutting it down.
What does it mean if Directed Automobile Accessories says OBDII feature not supported?
If the Directed Automobile Accessories system indicates 'OBDII feature not supported', the diagnostic data bus was not detected, therefore the SmartStart features will be limited.
What does Directed Automobile Accessories PTS shutdown error mean?
If the Directed Automobile Accessories system indicates 'PTS shutdown error', the PTS output from the module was not activated due to safety protection.
What to do if Directed Door locks ISO 1 not detected?
The Yellow/Black wire did not detect the expected signal.
Describes the DB3 as a universal, flashable data-bus interface module.
Highlights the DB3's capability to cover over 90% of vehicles on the road today.
Lists features like RSR/RXT compatibility, programmable functions via Directechs, and RF loop support.
Details compatibility with RSR, RXT, SmartStart, and 3X Lock Start systems.
Mentions the ability to configure the module using a flash module.
Explains the warranty for Directed interfaces ensuring high-speed digital connectivity and error-free data exchange.
Warns users to check for hood detection switches before servicing to prevent unexpected restarts.
General| Brand | Directed |
|---|---|
| Model | DB3 |
| Category | Automobile Accessories |
| Language | English |
To Next Page
