EasyManua.ls Logo

Directed DIRECTWIRE DIRECTECHS 933.TL14 - User Manual

Directed DIRECTWIRE DIRECTECHS 933.TL14
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DS3+ / DS4+
933.TL14
v1.02.198.9
2023 Toyota Camry
THTON7 Compatible
(Sold Separately)

Questions and Answers

  • N
    natasha14Aug 28, 2025
    What to do if Directed DIRECTWIRE DIRECTECHS 933.TL14 transponder functions were skipped?
    • C
      Cassie LiAug 28, 2025
      If compatible and when RXT mode is not desired or convenience features are needed, reset and reprogram the module.
  • C
    Cody HarrisAug 25, 2025
    What to do if Directed Automobile Electronics is waiting to begin the programming sequence?
    • O
      otaylorAug 25, 2025
      If the Directed Automobile Electronics is waiting to begin the programming sequence, ensure that the correct programming procedure is being followed.
  • S
    spattonSep 23, 2025
    What does it mean when my Directed Automobile Accessories says 'MUX not detected'?
    • D
      David KramerSep 23, 2025
      The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Check the connections.
  • A
    April HardyAug 31, 2025
    What to do if MUX is not detected on Directed DIRECTWIRE DIRECTECHS 933.TL14 Automobile Accessories?
    • A
      Anthony BurkeAug 31, 2025
      The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Check the connections.
  • O
    odavenportSep 2, 2025
    Why Directed DIRECTWIRE DIRECTECHS 933.TL14 Automobile Accessories says 'OBDII feature not supported'?
    • T
      Tyler SantosSep 3, 2025
      The diagnostic data bus was not detected, therefore the SmartStart features will be limited.
  • Q
    qcharlesAug 29, 2025
    What to do if Directed DIRECTWIRE DIRECTECHS 933.TL14 CAN bus incorrectly detected?
    • S
      Steven HughesAug 29, 2025
      Verify the CAN1 and CAN2 connections. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
  • D
    Donald SosaAug 27, 2025
    What to do if Directed Automobile Accessories module has no power?
    • A
      Andrew PopeAug 27, 2025
      First, ensure the D2D harness is connected and that there's 12V present between the red and black wires. If 12V is present, the module might be defective.
  • J
    Jerry CopelandSep 4, 2025
    Why is the OBDII feature not supported on my Directed DIRECTWIRE DIRECTECHS 933.TL14 Automobile Accessories?
    • T
      Timothy HumphreySep 4, 2025
      The diagnostic data bus was not detected, so the SmartStart features will be limited.
  • C
    charlenetylerSep 1, 2025
    Why speed was detected on Directed Automobile Accessories?
    • U
      uvaughanSep 1, 2025
      The vehicle was detected as moving, which prevents the system from shutting it down.
  • E
    Emily SandersAug 26, 2025
    What to do if ISO 1 is not detected on Directed Automobile Electronics?
    • E
      Elizabeth MooreAug 26, 2025
      If the Yellow/Black wire did not detect the expected signal for the Directed Automobile Electronics, refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.

Directed DIRECTWIRE DIRECTECHS 933.TL14 Specifications

General IconGeneral
BrandDirected
ModelDIRECTWIRE DIRECTECHS 933.TL14
CategoryAutomobile Accessories
LanguageEnglish

Related product manuals