What to do if Directed Automobile Accessories shows 'ISO 1 not detected'?
If the Directed Automobile Accessories module shows 'ISO 1 not detected', the Yellow/Black wire did not detect the expected signal. Check the connections, referring to “Installation (wiring diagrams & vehicle wiring reference charts)”.
What to do if Directed Automobile Accessories shows 'ISO 2 not detected'?
If the Directed Automobile Accessories module displays 'ISO 2 not detected', it means the Orange/Black wire didn't detect the expected signal. Check the connections, referring to “Installation (wiring diagrams & vehicle wiring reference charts)”.
What to do if Directed Automobile Accessories shows 'MUX not detected'?
If the Directed Automobile Accessories module displays 'MUX not detected', the Violet/Green or Violet/Brown wire didn't detect the expected voltage value. Check the connections, referring to “Installation (wiring diagrams & vehicle wiring reference charts)”.
Why Directed DB3 Automobile Accessories says 'OBDII feature not supported'?
If the Directed Automobile Accessories module indicates 'OBDII feature not supported', the diagnostic data bus was not detected, which means the SmartStart features will be limited.
What to do if Directed DB3 is waiting to begin the programming sequence?
If the Directed Automobile Accessories module is 'Waiting to begin the programming sequence', ensure the correct programming procedure is being followed.
What to do if Directed Automobile Accessories shows bypass processing error?
If the Directed Automobile Accessories system displays 'Bypass processing error', reset the module and try again.
What does it mean if Directed Automobile Accessories says ISO 1 not detected?
If the Directed Automobile Accessories system indicates 'ISO 1 not detected', the Yellow/Black wire did not detect the expected signal. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
What does it mean if Directed Automobile Accessories says ISO 2 not detected?
If the Directed Automobile Accessories system indicates 'ISO 2 not detected,' it means the Orange/Black wire did not detect the expected signal. Consult the “Installation (wiring diagrams & vehicle wiring reference charts)” to verify the connections.
What does it mean if Directed Automobile Accessories says MUX not detected?
If the Directed Automobile Accessories system indicates 'MUX not detected', the Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
Why Directed DB3 Automobile Accessories transponder functions were skipped?
If the Directed Automobile Accessories system indicates 'Transponder functions were skipped' when RXT mode is not desired or convenience features are needed, please reset and reprogram the module.
Describes the DB3 as a universal, flashable data-bus interface module.
Highlights the DB3's capability to cover over 90% of vehicles on the road today.
Lists features like RSR/RXT compatibility, programmable functions via Directechs, and RF loop support.
Details compatibility with RSR, RXT, SmartStart, and 3X Lock Start systems.
Mentions the ability to configure the module using a flash module.
Explains the warranty for Directed interfaces ensuring high-speed digital connectivity and error-free data exchange.
Warns users to check for hood detection switches before servicing to prevent unexpected restarts.
General| Brand | Directed |
|---|---|
| Model | DB3 |
| Category | Automobile Accessories |
| Language | English |
To Next Page
