Why is RFTD disabled in Directed DB3 Automobile Accessories?
RFTD is disabled in your Directed Automobile Accessories because 3x OEM Lock Remote Start Activation was attempted when the RFTD feature is disabled. Make sure 3x Lock Start is selected from the web in the flashing process.
What to do if Directed Door locks module has no power?
First, check the D2D harness connection and ensure there's 12 Volts between the red and black wires. If the voltage is correct, the Directed Door locks module itself might be defective.
What to do if Directed Door locks bypass data not detected?
Check the bypass line connection. If multiple wires are used, ensure they aren't inverted. Also, verify that the vehicle still operates correctly with the factory key.
What to do if Directed Door locks CAN1 not detected?
Check the CAN1 Tan and Tan/Black wire connections. Try waking up the data bus by turning the ignition on and trying again. If your installation doesn't need this connection, skip it by pressing the programming button 5 times.
What to do if Directed Door locks CAN2 not detected?
Check the CAN2 Orange/Green and Orange/Brown wire connections. Wake up the data bus by turning the ignition on and try again. If your installation does not require this connection, skip this step by pressing the programming button 5 times.
What to do if Directed Door locks J1850 not detected?
Check the J1850 wire connection. Wake up the data bus by turning the ignition on and try again.
What to do if Directed Door locks bypass processing error?
The bypass calculation has failed. Reset the Directed Door locks module and try again.
What does it mean if Directed Door locks transponder functions were skipped?
If RXT mode is not desired or convenience features are needed (if compatible), reset and reprogram the Directed Door locks module.
What to do if Directed Door locks initialization failed?
Reset the Directed Door locks module and complete the programming again.
Why Directed Door locks waiting to begin the programming sequence?
Ensure the correct programming procedure is being followed for the Directed Door locks.
General| Brand | Directed |
|---|---|
| Model | DB3 |
| Category | Automobile Accessories |
| Language | English |
Describes the DB3 as a universal, flashable data-bus interface module.
Highlights the DB3's capability to cover over 90% of vehicles on the road today.
Lists features like RSR/RXT compatibility, programmable functions via Directechs, and RF loop support.
Details compatibility with RSR, RXT, SmartStart, and 3X Lock Start systems.
Mentions the ability to configure the module using a flash module.
Explains the warranty for Directed interfaces ensuring high-speed digital connectivity and error-free data exchange.
Warns users to check for hood detection switches before servicing to prevent unexpected restarts.
To Next Page
