What to do if MUX is not detected in Directed Automobile Electronics?
If the MUX isn't being detected by your Directed Automobile Electronics on the Violet/Green or Violet/Brown wire, refer to 'Installation (wiring diagrams & vehicle wiring reference charts)' to check the connections.
What to do if initialization failed on Directed Car Alarm?
If the initialization process fails on your Directed Car Alarm, reset the module and complete the programming again. If the issue continues, further assistance may be needed.
What to do if Directed Automobile Accessories shows 'ISO 1 not detected'?
If the Directed Automobile Accessories module shows 'ISO 1 not detected', the Yellow/Black wire did not detect the expected signal. Check the connections, referring to “Installation (wiring diagrams & vehicle wiring reference charts)”.
Why was speed detected by Directed Automobile Accessories?
The vehicle was detected as moving, which prevents the system from shutting it down.
What to do if bypass data is not detected in Directed Automobile Accessories?
Check the bypass line connection for your Directed Automobile Accessories. If more than one wire is used, make sure they are not inverted. Ensure the vehicle still operates correctly using the factory key.
What to do if initialization failed for Directed DB3 Automobile Accessories?
Reset the module for your Directed Automobile Accessories and complete the programming again. If the issue persists, please contact Technical Support.
What does it mean if OBDII feature is not supported in Directed Automobile Accessories?
If the OBDII feature isn't supported in your Directed Automobile Accessories, it means the diagnostic data bus wasn't detected, which will limit the SmartStart features.
What does 'PTS shutdown error' mean in Directed DB3?
If the Directed Automobile Accessories system indicates 'PTS shutdown error,' the PTS output from the module was not activated due to safety protection.
What does it mean if Directed Automobile Accessories are waiting to begin the programming sequence?
It means that you should ensure the correct programming procedure is being followed.
What to do if I get a bypass processing error on my Directed Car Alarm?
If you encounter a bypass processing error with your Directed Car Alarm, reset the module and try again. If the condition persists, further assistance may be needed.
Describes the DB3 as a universal, flashable data-bus interface module.
Highlights the DB3's capability to cover over 90% of vehicles on the road today.
Lists features like RSR/RXT compatibility, programmable functions via Directechs, and RF loop support.
Details compatibility with RSR, RXT, SmartStart, and 3X Lock Start systems.
Mentions the ability to configure the module using a flash module.
Explains the warranty for Directed interfaces ensuring high-speed digital connectivity and error-free data exchange.
Warns users to check for hood detection switches before servicing to prevent unexpected restarts.
General| Brand | Directed |
|---|---|
| Model | DB3 |
| Category | Automobile Accessories |
| Language | English |
To Next Page
