To Next Page
J
jessica10Aug 26, 2025
What to do if MUX is not detected in Directed DB3?
- JJames WilliamsAug 26, 2025
The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Check the connections.
What to do if MUX is not detected in Directed DB3?
The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Check the connections.
Why was the brake not detected by my Directed DB3 Automobile Accessories?
The brakes were not detected by your Directed Automobile Accessories device, which prevents the system from shutting down the vehicle.
What to do if Directed Automobile Accessories shows 'Bypass processing error'?
If the Directed Automobile Accessories module shows 'Bypass processing error', reset the module and try again.
What to do if Directed Automobile Electronics CAN bus incorrectly detected?
Verify the CAN1 and CAN2 connections.
What to do if MUX is not detected in Directed Automobile Electronics?
If the MUX isn't being detected by your Directed Automobile Electronics on the Violet/Green or Violet/Brown wire, refer to 'Installation (wiring diagrams & vehicle wiring reference charts)' to check the connections.
What to do if initialization failed on Directed Car Alarm?
If the initialization process fails on your Directed Car Alarm, reset the module and complete the programming again. If the issue continues, further assistance may be needed.
What does 'Speed was detected' mean on my Directed DB3 Automobile Accessories?
If your Directed Automobile Accessories system is displaying 'Speed was detected,' it means the vehicle was detected as moving, which prevents the system from shutting it down.
What to do if Directed Remote Starter MUX not detected?
The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
Why was speed detected by Directed Automobile Accessories?
The vehicle was detected as moving, which prevents the system from shutting it down.
What to do if bypass data is not detected in Directed Automobile Accessories?
Check the bypass line connection for your Directed Automobile Accessories. If more than one wire is used, make sure they are not inverted. Ensure the vehicle still operates correctly using the factory key.
General| Brand | Directed |
|---|---|
| Model | DB3 |
| Category | Automobile Accessories |
| Language | English |
Describes the DB3 as a universal, flashable data-bus interface module.
Highlights the DB3's capability to cover over 90% of vehicles on the road today.
Lists features like RSR/RXT compatibility, programmable functions via Directechs, and RF loop support.
Details compatibility with RSR, RXT, SmartStart, and 3X Lock Start systems.
Mentions the ability to configure the module using a flash module.
Explains the warranty for Directed interfaces ensuring high-speed digital connectivity and error-free data exchange.
Warns users to check for hood detection switches before servicing to prevent unexpected restarts.
