page 30 of 56 ANDIAMO 2.XT (SRC) Hardware Guide - Version 2.1
CHAPTER 4: Operation
Output Format
The format of the MADI output signal can be defi ned - allowing for format
conversion of the MADI signal. The output signal status is indicated by two LEDs
(FORMAT).
56ch LED (green): indicates the channel format of the
MADI output signal.
LED ON = MADI output set to 56 channel mode.
LED OFF = MADI output set to 64 channel mode.
96k LED (yellow): indicates the frame format of the
MADI output signal @ 2 FS operation.
LED ON = MADI output set to 96kFrame
LED OFF = MADI output set to 48kFrame
NOTE
At 2 FS operation 56 ch refers to 28 channels (64ch > 32 channels).
At 4 FS operation 56 ch refers to 14 channels (64ch > 16 channels).
96k Frame is available at 2 FS operation only.
TIP
To convert a 2 FS MADI signal from 48k Frame (SMUX) into a 96k Frame signal, set
the converter to 2 FS operation and activate 96k Frame.
To Next Page
