page 39 of 56ANDIAMO 2.XT (SRC) Hardware Guide - Version 2.1
CHAPTER 4: Operation
The pinout of the digital and analog I/O is different. Check for appropriate cabling to
ensure proper operation and to avoid damages caused by improper connections.
Connecting AES3
Four DSUB-25 ports (4 x 4 input / output combined) are used for transmission of
the AES3 signals. Each port consists of four AES3 input and output ports itself
transmitting eight audio channels (I/O).
AES INPUT / OUTPUT
1..8
DSUB-25 Port
Digital audio input and output (AES3) -
connect audio channels 1 to 8 here
AES INPUT / OUTPUT
9..16
DSUB-25 Port
Digital audio input and output (AES3) -
connect audio channels 9 to 16 here
AES INPUT / OUTPUT
17..24
DSUB-25 Port
Digital audio input and output (AES3) -
connect audio channels 17 to 24 here
AES INPUT / OUTPUT
25..32
DSUB-25 Port
Digital audio input and output (AES3) -
connect audio channels 25 to 32 here
The pinout complies with AES59 (‘TASCAM pinout’) - see „Appendix A - DSUB-25
Pin assignment“ on page 48.
NOTE
To Next Page
