page 34 of 56 ANDIAMO 2.XT (SRC) Hardware Guide - Version 2.1
CHAPTER 4: Operation
Signal Routing
Two methods of signal routing are available:
• ‘Standard Bank Routing’ - signal routing of analog and digital I/Os as a whole.
• ‘Matrix Mode’ - individual signal routing of all analog and digital I/Os on a per
channel basis.
Standard Bank Routing
A 4 by 4 routing matrix allows to distribute the signals among one another. There
are four output destinations:
AES 16 AES3 output ports
D/A 32 analog outputs
01..32 MADI output channel 01 to 32
33..64 MADI output channel 33 to 64
The sources are selectable for each destination individually. The source selection is
displayed by four green LEDs each of.
LED Code Source
AES input
Analog input
MADI input channel 01 to 32
(01 to 16 @ 2 FS, 01 to 08 @ 4 FS)
MADI input channel 33 to 64
(17 to 32 @ 2 FS, 09 to 16 @ 4 FS)
To Next Page
