DirectOut Technologies ANDIAMO 2.XT - Level Meters - Analog I;O

page 32 of 56 ANDIAMO 2.XT (SRC) Hardware Guide - Version 2.1
CHAPTER 4: Operation
Level Meters - analog I/O
All 32 analog channels have individual signal metering each with three LEDs. As
the sensitivity of the converters may be varied the trigger threshold of each LED
corresponds to the digital scale (dBFS).
A/D IN
OVR
LED (red): indicates an analog input overload.
LED ON = analog input signal equals to more than -0.5 dBFS
A/D IN
SIG
LED (green): indicates signallevel of channel input.
LED ON = analog input signal equals to more than -80 dBFS
The light intensity of the LEDs depends on the
audio level.
D/A OUT
SIG
LED (green): indicates signallevel of channel output
LED ON = analog outputsignal equals to more than -80 dBFS
The light intensity of the LEDs depends on the
audio level.