page 47 of 56ANDIAMO 2.XT (SRC) Hardware Guide - Version 2.1
CHAPTER 7: Technical Data
A/D Section
• SNR: -115.5 dB RMS (20 Hz - 20 kHz) / -118 dB(A)
• THD @ -1 dBFS: -113 dB
• Frequency response: -0.15 dB (10 Hz) / -0.15 dB (20 kHz)
• Input impedance: 20 kΩ (balanced) / 10 kΩ (unbalanced)
• Input level (depending on model):
Model / Level High Low
Model A +15 dBu +6 dBu
Model B +18 dBu +9 dBu
Model C +24 dBu +15 dBu
D/A Section
• SNR: -116 dB RMS (20 Hz - 20 kHz) / -119 dB(A)
• THD @ -1 dBFS: -109 dB
• Frequency response: -0,5 dB (10 Hz) / -0,15 dB (20 kHz)
• Output impedance: < 50 Ω
• Output level (depending on model):
Model / Level High Low Minimum Load Resistance
Model A +15 dBu +6 dBu 600 Ω
Model B +18 dBu +9 dBu 600 Ω
Model C +24 dBu +15 dBu 2.4 kΩ
Sample Rate
• 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz ± 12.5 %
MADI Format (I/O)
• 48k Frame, 96k Frame
• 56 channel, 64 channel
• S/MUX 2/4
SRC Performance [SRC Version]
• all rates from 30 kHz to 50 kHz and their multiples
• THD+N: 140 dB
• Frequency response ripple: < 0.025 dB
• Latency: < 140 samples
Latency
• about 1 ms (AD - DA)
Word Clock
• 1 x BNC socket (75 Ω impedance) - input
• 1 x BNC socket (75 Ω impedance) - output
• Termination 75 Ω switchable
• AES11 (DARS supported)
USB
• 1 x USB 2.0 socket (Type B)
To Next Page
