103
WIRELESS
Create a wireless connection between your wireless router and your DIRECTV
HD Receiver, so your receiver can access the Internet.
Along with the Network Requirements at the beginning of Appendix 2 your
will need:
A wireless adapter that uses an Ethernet port to connect to a media
device, preferably the DIRECTV CINEMA Connection Kit - Wireless, as
mentioned above. [USB devices are not supported by the DIRECTV HD
Receiver]
A wireless router (in place of a regular router). You must have initialized
your wireless device for your home network before beginning to network
your DIRECTV HD Receiver.
Step 1: Connect your DIRECTV HD Receiver to the
wireless adapter
Connect one end of the Ethernet cable to the Ethernet port on the back of the
wireless adapter. Connect the other end of the Ethernet cable to the Ethernet
port on the back of your DIRECTV HD Receiver. If using the DIRECTV Cinema
Connection Kit – Wireless, follow connection instructions found in the user’s
manual that came with the device (or go to directv.com/getconnected) to
determine proper connection.
Plug your wireless adapter into an electrical outlet.
Ethernet Cable
Wireless Transceiver
Receiver
Ethernet cable plugs
into Receiver
Ethernet cable
connects to the
Ethernet port of the
wireless adapter.
APPENDIX 4: HOW TO NETWORK YOUR HD RECEIVER
APPENDICES
To Next Page
Loading...
Need help?
General
