107
*NOTE: In Native mode, the receiver automatically adjusts resolutions to match the resolution of individual TV programs as
they are tuned.
If Native is turned on, the FORMAT key cycles through Stretch, Letter and Crop for the current TV program’s native resolution. The
FORMAT key allows you to easily cycle all resolution and format settings with a single key until the picture displays the way you
like it.
If pressing this key causes a loss of video and audio, continue to press it until the picture returns. (Wait a second between presses
to allow the Receiver to change the resolution.) This can happen if your settings include a resolution that your TV doesn’t support.
To correct this, you’ll need to change your resolution setting: Press MENU, select “Settings & Help,” “Settings,” “HDTV” and then
select “TV Resolutions.” Mark or unmark the TV Resolutions to display the resolutions supported by your television.
Resolution (RES) Key on Receiver Front Panel
This key is used to through cycle all available resolutions on your DIRECTV HD DVR. It does not through cycle format settings. If
video and audio are not appearing, it may be because the current resolution setting is not supported by your television. By pressing
this key, you can check all available resolutions to see if that solves the problem. The lights next to the RES key on the front panel
will light below the resolution to which the receiver is set; they will change with each key press.
APPENDIX 5: ABOUT HIGH-DEFINITION
APPENDICES
To Next Page
Loading...
Need help?
General
