EN
10
COMPACT 1.4
By selecting this function, Compact displays temperature inside cabin.
F2
programs the equipment so that it is automatically disconnected during a 1-9 hour period.
In order to program, push the On/off key
until
F2
is shown on display, select functioning
time using the keys
and conrm by pushing On/off
.
In order to switch on Compact, push the On/off key . Equipment always starts on function
F4
(Automatic Function). To change function, push the On/off key
and the various
functions will be displayed one by one. Release key when desired function is reached. The
rst time equipment is switched on, it will be initiated with the pre-established parameters.
Equipment switching on
Function
F1
-
Digital thermometer function
Function
F2
-
Time programming function
How to deactivate remote control:
In order to deactivate remote control, push key
of control panel until
C
C
, ashes on dis-
play. Once it stops ashing, push key
on panel. You will have to do it within 30 seconds
or else you will have to repeat the whole operation.
Selecting
F0
in the display shows the selected temperature and allows the user to
choose the comfort temperature which will be displayed from 15ºC to 27ºC or 59ºF
to 71ºF and to vary the unit’s centrifugal blower speed (5 speeds indicated with the
characters
V1
to
V5
).
Comfort temperature can be controlled by briey pressing the keys
. of the
control panel or
remote control.
The centrifugal blower speeds will be controlled by keeping the
keys of the
control panel pressed down or from
on the remote control, with the display showing
V1
,
V2
,
V3
,
V4
,
V5
. The display shows the degrees selected when the unit is running.
Function
F0
- Manual operation
To Next Page
Loading...
