EN
11
COMPACT 1.4
To activate this function, keep the On/Off
key pressed down until the display shows
F6
, and then release the key to directly enable ºF. To return to ºC, keep the
key on the
control panel pressed down with the display flashing
C
C
, when it stops flashing,
press the key on the control panel. The control is disabled when carrying out this
operation, meaning it must be registered again once nished.
Function
F6
-
ºF Selection
Selecting
F4
allows the user to choose the comfort temperature 15ºC to 27ºC (59ºF to
71ºF), which will be selected from the control panel
or the remote control
. When selecting, the display will switch between
CA
and the degrees selected.
With this function the unit automatically regulates and controls comfort temperature by
acting on the compressors and fan speed. Pressing the remote control key
cancels
function
F4
and moves to
F0
(Manual Function). The unit runs initially in
F4
with the
default parameters.
Function
F4
-
Automatic unit operation
To Next Page
Loading...
