USER MANUAL 19
REMOVING BLOCKAGES
WARNING: To prevent damaging the steam cleaner DO NOT insert any sharp implements into
the nozzle on the handheld steamer.
1. Water may be released through the bleed valve located on the back of the handheld steamer when
there is a blockage. If this occurs, rst remove the mop head.
2. After the mop head is removed, take a thin object such as a paper clip and insert it in the area shown to
remove the blockage. Check the tools are clean and free from debris. Rinse tools under running water.
1
2
1
1
WARNING: Danger of scalding
MAINTAINING YOUR STEAM
CLEANER
To Next Page
Loading...
