EasyManua.ls Logo

Dish Network DISH 1000.2 - DISH 1000

Dish Network DISH 1000.2
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Dish Antennas - DISH 1000 2 - 4
DISH 1000
Views 110°, 119°, and 129°.
Standard configuration: DP Plus Twin and DP Single/Dual.
Can use three Singles/Duals (on a W-Bracket) and a switch.
Use with DISH Pro/DP Plus LNBFs or switches, or Legacy LNBFs or switches.
Do not mix Legacy and DP/DPP LNBFs and switches.
The DP Plus 1000.2 LNBF cannot be used on a DISH 1000.
Do not use a DP Plus 33 Switch, DP34 Switch, or DP21 Switch with the DP
Plus Twin LNBF.
After peaking on 119°, confirm signal strength on 110° and 129°.
The following Legacy receivers do not have 129° software support: Models 1000, 3000, 4000, 5000, JVC-DVHS (IRR),
and DishPlayer 7100/7200.
The foot on the DISH 1000 is the same as the DISH 500, but the mast of the DISH 1000 is longer to allow for full
azimuth rotation.
Antenna dimensions: 23.5"W x 18.5"H.

Other manuals for Dish Network DISH 1000.2

Related product manuals